Set And View Necessary Parameters; Change Parameter Settings - YASKAWA GA500 Maintenance & Troubleshooting

Note:
The drive will only display A1-02 [Control Method Selection], A1-xx, A2-01 to A2-32 [User Parameter 1 to User Parameter 32], and E5-01
[PM Motor Code Selection].
◆

Set and View Necessary Parameters

Show the frequency reference screen.
Note:
Push and hold to return to frequency reference screen from any screen.
The setup mode shows the parameters set in A2-01 to A2-32 [User Parameter 1 to User Parameter 32]. This lets you
quickly access and change these parameters.
Note:
Setup mode always shows
01 to A2-32 change.
Continue to change the parameters or press and hold
◆

Change Parameter Settings

Show the frequency reference screen in advance.
Note:
Push and hold to go back to the frequency reference screen from any screen.
This example shows how to change C1-01 [Acceleration Time 1]. Set the parameter to the necessary value.
YASKAWA TOEPYAIGA5001A GA500 DRIVE MAINTENANCE & TROUBLESHOOTING
Figure 6.12 How to Examine the Changed Parameters
(A1-06 [Application Preset]) at the top of the list. When you change the setting, the settings for A2-
Figure 6.13 View and Set the Necessary Parameters
to go back to the frequency reference screen.
6.3 Keypad Operation
251
6