YASKAWA GA500 Maintenance & Troubleshooting page 18

1.4 Replace Cooling Fans
■
Remove a Fan
1.
To remove the fan finger guard from the drive, push the hooks on the left and right sides of it and pull up.
A - Fan finger guard
2.
Pull the cooling fan straight up from the drive. Disconnect the power supply connector and remove the fan
from the drive.
A - Cooling fan
■
Install a Fan
Reverse the removal procedure to install a cooling fan.
1.
Connect the power supply connector between the drive and cooling fan.
18
Figure 1.1 Remove the Fan Finger Guard
Figure 1.2 Remove the Cooling Fan
Figure 1.3 Connect the Power Supply Connector
YASKAWA TOEPYAIGA5001A GA500 DRIVE MAINTENANCE & TROUBLESHOOTING