17. Push latch (A) to unlock platform (B).
18. Pull platform (A) toward the cab until it stops and the latch
is engaged.
19. If this is the first time the header is connected to the
windrower, calibrate the header. For instructions, refer to
5.3 Calibrating Header on HarvestTouch
5.2.4 Detaching D1X and D1XL Series Draper Headers
The instructions in this section outline how to properly detach D1X and D1XL Series Draper Headers.
DANGER
To prevent bodily injury or death from the unexpected start-up or fall of a raised machine, always stop the engine and
remove the key before leaving the operator's seat, and always engage the safety props before going under the
machine for any reason.
DANGER
Ensure that all bystanders have cleared the area.
262177
ATTACHING HEADERS TO WINDROWER
™
Display, page
225.
217
B
Figure 5.72: Left Platform
Figure 5.73: Left Platform
A
1015478
A
Revision A