Advising Customer Where To Install Registration Plates - MacDon M2170NT Unloading And Assembly Instructions

PERFORMING PREDELIVERY CHECKS

4.1.2 Advising Customer where to Install Registration Plates

Before delivering the windrower to the customer, advise the customer where to mount the registration plate(s) (not
supplied by MacDon). One registration plate must be mounted on the cab-end of the windrower. Depending on local
regulations, an additional registration plate might have to be mounted onto the engine-end of the windrower.
• Cab-end of the windrower: Mount the registration plate onto bracket (A).
• Engine-end of the windrower: Center and mount the registration plate onto flat surface (B) of the hood.
B
Figure 4.5: Registration Plate Installation Locations
124
262177 Revision A