Table of Contents
Advertisement
4. If lubricant is needed, remove breather cap (A) and add
lubricant until it runs out of the level check port.
NOTE:
For oil requirements, refer to the inside back cover.
5. Replace oil level check plug (A) and the breather cap, and
tighten both.
4.1.9 Checking Air Conditioning Compressor Belts
The windrower's air conditioner compressor is belt-driven. The belt must be tensioned correctly for the air conditioning
system to function properly.
1. Ensure that air conditioning (A/C) compressor belts (A) are
tensioned so that a force of 45 N (10 lbf) applied to the
midspan of each belt deflects it by 5 mm (3/16 in.).
262177
PERFORMING PREDELIVERY CHECKS
Figure 4.17: Gearbox Lubricant Filler
Figure 4.18: Gearbox Lubricant Check Plug
Figure 4.19: A/C Compressor Belts
130
A
A
A
Revision A
Advertisement
Table of Contents
