3.15 Replacing or Removing Speed Indicator Sign Decal
A 25 km/h speed identification sign (SIS) decal is already installed on the windrower from the factory, however, different
countries may require a different SIS decal or may not require an SIS decal at all.
1. Identify the required SIS decal according to your local jurisdiction or the jurisdiction where the windrower will operate.
• To replace the decal, proceed to Step
• To remove the decal/SIS bracket, proceed to Step
Replacing the SIS decal
2. Retrieve the appropriate SIS decal from the information
package in the cab.
3. Locate existing SIS decal (A) on the left mirror arm.
4. Wipe the existing decal with a clean cloth to remove dirt
and grease.
5. Apply decal (A), according to the local jurisdiction, over the
existing 25 km/h decal.
262177
ASSEMBLING WINDROWER
2, page
97.
6, page
98.
Figure 3.104: Existing Decal on Windrower
Figure 3.105: SIS Decal for UK
Figure 3.106: SIS Decal for Germany
97
A
A
A
Revision A