Table of Contents
Advertisement
ASSEMBLING WINDROWER
3.14 Positioning Mirror Arms
The mirror arms must be moved to the field position.
A
B
D
C
Figure 3.103: Mirror Arm Swiveled into Field Position
1. Loosen retaining nut (A) and pivot nut (B) on support arm (C). Swivel the support arm cab-forward by 90°, as shown.
2. Torque retaining nut (D) to 48 Nm (35 lbf·ft).
3. Torque pivot nut (B) to 26 Nm (19 lbf·ft [230 lbf·in]).
4. Repeat this procedure for the other mirror arm.
96
262177
Revision A
Advertisement
Table of Contents
