Table of Contents
Advertisement
5. Press LIGHT switch (A) to turn on the headlights.
6. Shut down the engine. Leave the cab, but do NOT turn off
the headlights. Confirm that the HarvestTouch
headlights, and the egress light shut off after 3 minutes.
4.2.3 Checking HarvestTouch
™
The HarvestTouch
Display shows the windrower's performance gauges. The functionality of this feature will need to be
verified.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, stop the engine and remove the key
from the ignition before leaving the operator's seat.
DANGER
Ensure that all bystanders have cleared the area.
1. If the windrower engine is not already running, start it. For
instructions, refer to
4.1.11 Starting Engine, page
2. If a header is not attached to the windrower, confirm that
™
the HarvestTouch
Display displays no-header page (A).
262177
PERFORMING PREDELIVERY CHECKS
™
Display, the
Figure 4.54: Headlight Switch
™
Display Gauges
140.
Figure 4.55: HarvestTouch
150
A
A
Display – No Header
™
Revision A
Advertisement
Table of Contents
