Table of Contents
Advertisement
3.23 Removing Windrower from Assembly Stand
Remove the windrower from the lift stands before performing predelivery checks.
DANGER
Ensure that all bystanders have cleared the area.
DANGER
The equipment used for loading or unloading a machine must meet or exceed the requirements specified in this
document. Using inadequate equipment may result in chain breakage, vehicle tipping, machine damage or bodily harm
to operators or bystanders.
1. Position a jack under the jack point of each drive wheel leg and under the rear hitch.
2. Raise the jacks to take the weight off the stands, and remove the stands.
3. Lower the windrower slowly to the ground, and remove the jacks.
262177
ASSEMBLING WINDROWER
119
Revision A
Advertisement
Table of Contents
