Table of Contents
Advertisement
6. Shut down the engine and perform the following safety
system checks:
a.
Open the hood.
b. Pry the steering interlock away from pintle arms (A) by
inserting a wedge or a pry bar between one of
interlock channels (B) and the pintle arm.
c.
Insert a wooden block approximately 19 mm (3/4 in.)
thick between the opposite channel and the pintle arm
so that the interlock channel is clear of the pintle arm.
d. Turn the steering wheel off-center and move the GSL
to PARK.
e.
Try starting the engine to confirm that the
™
HarvestTouch
Display displays LOCK STEERING WHEEL
IN CENTER POSITION. The engine should NOT
turn over. If the engine turns over, the safety system
requires adjustment. Refer to the windrower's
technical manual for the adjustment procedures.
f.
Remove the key from the ignition.
g.
Remove the wooden block and close the hood.
7. Center the steering wheel. Place the GSL in NEUTRAL but not in PARK. Try starting the engine to confirm that the
™
HarvestTouch
Display displays MOVE GSL INTO PARK. The engine should NOT turn over. If the engine turns over, the
safety system requires adjustment. Refer to the windrower's technical manual for the adjustment procedures.
8. With the engine off, center the steering wheel. Place the GSL in PARK and ensure that the operator's station is NOT
locked. Try starting the engine and confirm that the engine does NOT turn over, and the HarvestTouch
displays LOCK SEAT BASE. If the engine starts, the safety system requires adjustment. Refer to the windrower's
technical manual for the adjustment procedures.
4.2.2 Checking HarvestTouch
The windrower's HarvestTouch
windrower and to turn the cab lights off automatically when the Operator leaves the cab. The functionality of these
features will need to be verified.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
DANGER
Ensure that all bystanders have cleared the area.
262177
PERFORMING PREDELIVERY CHECKS
™
Display Status Screen and Auto Lights
™
Display should be able to automatically detect the type of header attached to the
Figure 4.50: Pintle Arms
148
A
B
™
Display
Revision A
Advertisement
Table of Contents
