Table of Contents
Advertisement
2. Grasp the hood by louver (A), and lower it until the hood
engages the latch.
NOTE:
Check that the latch lever is not tilted to ensure the hood is
latched.
4.1.10 Bleeding Brakes – Windrowers Sold In Germany Only
If the windrower is equipped with the secondary brakes package, you must bleed the brakes once before using them for
the first time.
NOTE:
This procedure requires two people. Have one person operate the HarvestTouch
wheels.
1. Place the windrower in ENGINE-FORWARD mode. For instructions, refer to the windrower operator's manual.
2. Using a forklift, lift the cab end of the windrower
approximately 1.3 m (51 in.) (B) off of the ground, or high
enough so that left cab-forward drive wheel assembly (A)
can be removed. Place stand (C) under the windrower
frame. Repeat this step for the other drive wheel.
262177
PERFORMING PREDELIVERY CHECKS
Figure 4.20: Engine Compartment
Figure 4.21: Supporting Windrower
131
A
™
Display, and another person at the drive
B
A
C
Revision A
Advertisement
Table of Contents
