Table of Contents
Advertisement
3.8 Installing Anti-Shimmy Dampeners
The anti-shimmy dampeners stabilize the caster wheels.
1. Remove and retain retaining ring (A).
2. Remove and discard yellow spacer (B).
3. Retrieve the anti-shimmy dampener shocks, caster arms,
and hardware from the toolbox in the left platform.
NOTE:
Use the ignition key to unlock the toolbox.
4. Install flat washer (A) and key (B) onto the caster shaft.
5. Install caster arm (A) onto the caster shaft, and secure it
with one M16 X 85 bolt (B) and nut (C).
6. Install retaining ring (D).
7. Torque nut (C) to 190–200 Nm (140–147 lbf·ft).
262177
ASSEMBLING WINDROWER
Figure 3.43: Caster Wheel – Left Cab-Forward
Figure 3.44: Caster Wheel Extension – Left Cab-
Forward
Figure 3.45: Caster Arm – Left Cab-Forward
62
A
B
B
C
A
A
D
B
Revision A
Advertisement
Table of Contents
