Table of Contents
Advertisement
2.6 Removing Wheel Leg Assemblies
Remove the wheel leg assemblies from their shipping locations and set them aside for installation.
DANGER
The wheel leg assemblies are heavy and difficult to maneuver. Use a proper lifting device. Falling wheel leg assemblies
can result in serious personal injury.
CAUTION
Two people are required for this task: One person operates the lifting device while the other person helps to control
the movement of the wheel leg assembly.
DANGER
Ensure that all bystanders have cleared the area.
1. Position the lifting device to remove wheel leg (A) from the
left side of the windrower first.
NOTE:
When configured for container shipments, the wheel legs
are shipped with right leg (A) on the left side of the
shipping assembly and left leg (B) on the right side.
2. Secure the hydraulic hoses to prevent them from damaging
the windrower hood.
3. Feed lifting strap (A) through the top of the leg assembly.
4. Position the strap so that the leg will be balanced. Position
the strap so that it will NOT damage float sensor (B).
5. Adjust the lifting device to support the leg.
6. To prevent damage to the leg assembly, lay down
cardboard or rubber on the ground where the leg assembly
will be set down.
262177
UNLOADING WINDROWER
Figure 2.36: Leg Shipping Configuration
Figure 2.37: Attaching Lifting Strap
34
A
B
B
A
Revision A
Advertisement
Table of Contents
