Table of Contents
Advertisement
3.18 Connecting Signal Light Placards and Registration Plate Electrical
Harness
Follow these steps to connect the signal light placards and registration plate mount electrical harness.
Narrow transport lighting leg harness (A) is routed next to the
wheel legs and connects to signal light placards (B) on the cab
side and to narrow transport main harness (C). Narrow
transport main harness (C) connects to registration plate
mount (E) just below the cab, and is routed to the walking beam
to connect to signal light placards (D).
Cab-forward signal light placards harness
1. Route left lighting leg harness (A) behind left signal light
placard support (B) as shown.
2. Loosely secure the harness to the placard lighting support
with cable tie (C).
262177
ASSEMBLING WINDROWER
Figure 3.119: Electrical Harness Routing
Figure 3.120: Left Cab-Forward Signal Light Placard
105
B
A
E
B
A
C
D
C
B
Revision A
Advertisement
Table of Contents
