Table of Contents
Advertisement
Predelivery Checklist
Perform these checks and adjustments prior to delivery to your Customer. Complete this checklist and provide it to the
Dealer or the Operator.
CAUTION
Carefully follow the instructions given. Be alert for safety related messages that bring your attention to hazards and
unsafe practices.
Windrower Serial Number:
M2170NT Windrower Predelivery Checklist
ü ü Item
Check for shipping damage or missing parts. Ensure that all
shipping material has been removed.
Check for loose hardware. Tighten any loose hardware to the
specified torque value.
Check the pressure level of the drive and caster tires. Ensure
that the pressures matches the specified values.
Check the lubricant level in the wheel drive hubs.
Check the level of the engine coolant.
Check the engine air intake.
Check the level of engine oil. Ensure that there are no engine
oil leaks.
Check the level of hydraulic oil. Ensure that there are no
hydraulic fluid leaks.
Check the fuel separator for water and foreign material.
Drain and clean the fuel separator as needed.
Check level of lubricant in the gearbox.
Ensure that the air conditioning compressor belt is properly
tensioned.
Ensure that the operator presence system is working
properly.
Ensure that the horn is working properly.
Start the engine. Allow the engine to reach operating
temperature. Perform the Operational Checks listed below.
Ensure that the fuel and diesel exhaust fluid (DEF) gauges on
™
the HarvestTouch
Display work properly.
Ensure that the engine speed is displayed correctly on
™
the HarvestTouch
Display.
Ensure that selective catalytic reduction (SCR) conditioning
inhibit is turned off.
Ensure that the air conditioning and heater are functioning
properly.
262177
Engine Serial Number:
Reference
6.4 Torque Specifications, page 241
4.1.14 Checking Tire Pressure, page 146
4.1.12 Checking and Adding Wheel Drive Lubricant,
page 145
or
4.1.13 Checking Wheel Drive Lubricant
– 12 Bolt (Optional), page 145
4.1.7 Checking And Adding Engine Coolant, page
128
4.1.3 Checking Engine Air Intake, page 125
4.1.4 Checking and Adding Engine Oil, page 125
4.1.5 Checking and Adding Hydraulic Oil, page 127
4.1.6 Checking Fuel Separator, page 128
4.1.8 Checking Engine Gearbox Lubricant Level and
Adding Lubricant, page 129
4.1.9 Checking Air Conditioning Compressor Belts,
page 130
4.2.1 Checking Operating Safety System, page 147
4.2.12 Checking Horn, page 168
4.1.11 Starting Engine, page 140
4.2.3 Checking HarvestTouch
150
4.2.8 Checking Engine Speed, page 158
4.2.10 Checking Selective Catalytic Regeneration
Conditioning Mode, page 163
4.2.14 Checking Climate Controls, page 169
253
—
or
™
Display Gauges, page
Revision A
Advertisement
Table of Contents
