Table of Contents
Advertisement
4. Lower windrower onto 152 mm (6 in.) blocks (A) as shown.
5. Remove the chains from the shipping frame.
6. Check for shipping damage and missing parts.
2.2.2 Moving Windrower to Assembly Area – Forklift Method
The windrower can be moved to the assembly area using a forklift.
DANGER
Do NOT allow bystanders in the unloading area.
DANGER
The equipment used for loading or unloading a machine must meet or exceed the requirements specified in this
document. Using inadequate equipment may result in chain breakage, vehicle tipping, machine damage or bodily harm
to operators or bystanders.
IMPORTANT:
Refer to the shipping assembly specifications in Table
suitable forklift.
262177
UNLOADING WINDROWER
Figure 2.5: Windrower Shipping Assembly on Blocks
2.1, page 19
and consult your forklift distributor to determine a
18
A
Revision A
Advertisement
Table of Contents
