Table of Contents
Advertisement
10. Once the calibration process completes all nine stages, the
message CALIBRATING COMPLETED appears. Select X
icon (A) to exit the page.
5.3.2 Calibrating Header Position Sensors on HarvestTouch
The header position sensors need to be recalibrated whenever the HarvestTouch
replaced, sensor readouts are erratic, a pump has been replaced, or when a new header type or attachment is connected
to the windrower.
DANGER
Ensure that all bystanders have cleared the area.
NOTE:
This calibration MUST be performed with the engine running and the header engaged.
1. Start the engine.
2. Engage the header.
NOTE:
Once the header is engaged, header gauges (A) will appear
™
on the HarvestTouch
3. Select MENU icon (B).
262177
ATTACHING HEADERS TO WINDROWER
Display home page.
Figure 5.100: Calibration Page
™
Display is replaced, a position sensor is
Figure 5.101: HarvestTouch
229
™
Display
A
™
Display
A
B
Revision A
Advertisement
Table of Contents
