Table of Contents
Advertisement
3.11 Installing Left Platform Assembly
Install the platform, railings, and steps on the left side of the windrower.
IMPORTANT:
To avoid accidental damage, raise the windrower hood.
1. Install platform linkage (A) onto the frame with the two
bolts and nuts. Nuts (B) should face outward.
2. Remove three existing nuts and bolts (A) and adjuster
bolt (B) from the left platform bracket. Retain the hardware
for installation.
3. Attach a suitable lifting device to lift brackets (C) and move
the left platform next to the left side of the windrower.
4. Align the holes in platform bracket (A) with the holes in the
windrower frame, and secure the bracket with three
existing bolts (B) and nuts (C). The nuts should face
outward.
262177
ASSEMBLING WINDROWER
Figure 3.62: Platform Linkage
Figure 3.63: Left Platform
Figure 3.64: Left Platform Bracket
71
A
B
C
A
B
A
C
C
B
B
A
Revision A
Advertisement
Table of Contents
