2.7 Removing Upper Shipping Supports
Remove the specified shipping supports in preparation for windrower assembly.
DANGER
Ensure that all bystanders have cleared the area.
1. Support the cross member behind the cab with a suitable
lifting device.
2. Remove two nuts and two bolts (A) on each side, and then
remove the cross member. Discard the bolts, nuts, and
cross member.
3. Remove nut and bolt (A), and remove vertical support (B).
Discard the nut, bolt, and vertical support. Repeat this step
on the opposite side.
262177
UNLOADING WINDROWER
Figure 2.43: Forward Cross Member
Figure 2.44: Forward Vertical Supports
37
A
B
A
Revision A