Table of Contents
Advertisement
3.6 Installing Drive Wheels
A drive wheel includes a rim and a bar or turf tire, depending on the application. The windrower is shipped with the drive
wheels unattached. They will need to be installed on the windrower.
DANGER
Ensure that all bystanders have cleared the area.
CAUTION
Use a lifting device capable of supporting a minimum of 907 kg (2000 lb.) to lift the wheel assembly.
1. Retrieve the bag of M20 nuts (A) from the cab.
NOTE:
The bag contains 20 or 24 nuts (MD #205397).
2. Clean the mounting surface on the wheel drive and the rim.
3. M2170NT Windrowers sold in Germany: If replacing a rim
on a windrower equipped with a secondary set of brakes,
remove the spacer plate as follows:
a.
Remove two nuts (A) and bolts (C) attaching spacer
plate (B) to the inside of the wheel rim.
b. Discard nuts (A), spacer plate (B), and bolts (C).
262177
ASSEMBLING WINDROWER
A
Figure 3.20: M20 Wheel Nuts (MD #205397)
Figure 3.21: Drive Wheel
54
C
B
A
A A
Revision A
Advertisement
Table of Contents
