3.2 Removing Remaining Items from Shipping Configuration
With the windrower on the assembly lift stand, remove the rear lighting bezel, cab suspension shipping supports, and fork
channels.
DANGER
Ensure that all bystanders have cleared the area.
1. On the right side of the machine, remove two bolts and
two nuts (A) that secure the rear lighting bezel to the
shipping bracket. Discard the bolts, but retain the nuts for
reinstallation.
2. Set lighting bezel (B) aside for reinstallation.
3. Remove two bolts and nuts (A), and cab suspension
shipping support (B) from below the front cab. Discard the
bolts, nuts, and shipping support. Repeat this step on the
opposite side.
262177
ASSEMBLING WINDROWER
Figure 3.3: Rear Light Bezel
Figure 3.4: Right Cab Suspension Support
42
B
A
A
B
Revision A