Table of Contents
Advertisement
Chapter 3: Assembling Windrower
Once the windrower has been unloaded, assembly can begin.
3.1 Lifting Windrower onto Assembly Stand (B9064)
The windrower must be assembled on a MacDon Export Assembly Stand (B9064).
DANGER
Ensure that all bystanders have cleared the area.
DANGER
The equipment used for loading or unloading a machine must meet or exceed the requirements specified in this
document. Using inadequate equipment may result in chain breakage, vehicle tipping, machine damage or bodily harm
to operators or bystanders.
1. Before lifting the windrower onto an assembly stand, ensure that the lifting device meets or exceeds the specified
requirements. For the lifting requirements, refer to the relevant topic:
• If lifting with a forklift, refer to
• If lifting with a crane, refer to
262177
2.2.2 Moving Windrower to Assembly Area – Forklift Method, page 18
2.2.1 Moving Windrower to Assembly Area – Crane Method, page 16
39
Revision A
Advertisement
Table of Contents
