Step 10. Attach Header; Header Attachment - D Series - MacDon M150 Assembly Instructions Manual

STEP 10. ATTACH HEADER

A. HEADER ATTACHMENT - D SERIES
B
IMPORTANT
To prevent damage to the lift system
when lowering header lift linkages
without a header or weight box
attached to windrower, ensure that float
engagement pin is installed in storage
location (A), and not installed at hole
location (B).
a. If not installed, attach draper header boots
(supplied with header) to windrower lift linkage as
follows:
DANGER
Stop engine, and remove key from ignition
before leaving operator's seat for any reason.
A child or even a pet could engage an idling
machine.
Form 169018
UNLOADING AND ASSEMBLY
A
b. Remove hairpin on pins (F) and remove pins from
18
D
1. Remove pin (C) from boot (D).
E
D
2. Locate boot (D) on lift linkage (E), and reinstall
pin (C). Pin may be installed from either side
of boot.
3. Secure pin (C) with hairpin.
4. Repeat for opposite lift linkage.
F
header legs.
C
C
(continued next page)
Revision C