Standard Di, Ro - ABB ACS880 Firmware Manual

No. Name/Value
107.64 Active control
tokens 1
0000h...FFFFh
110

110 Standard DI, RO

110.01 DI status
0000h...FFFFh
110.02 DI delayed status
0000h...FFFFh
110.03 DI force selection
Bit Value
0 1 = Force DI1 to value of bit 0 of parameter
1 1 = Force DI2 to value of bit 1 of parameter
2 1 = Force DI3 to value of bit 2 of parameter
3 1 = Force DI4 to value of bit 3 of parameter
4 1 = Force DI5 to value of bit 4 of parameter
5 1 = Force DI6 to value of bit 5 of parameter
6...14 Reserved
15 1 = Force DIIL to value of bit 15 of parameter
0000h...FFFFh
110.04 DI force data
0000h...FFFFh
110.05 DI1 ON delay
Connected
signal
status
DI status
0.0 ... 3000.0 s
110.06 DI1 OFF delay
0.0 ... 3000.0 s
Description
Defines active control tokens on the device. See section
Control tokens on page 12.
Active control tokens.
Configuration of digital inputs and relay outputs.
Status of digital inputs DIIL and DI6...DI1.
Bits 0...5 reflect the status of DI1...DI6; bit 15 reflects
the status of the DIIL input.
Status of digital inputs.
Status of digital inputs DIIL and DI6...DI1 after any
activation/deactivation delays.
Bits 0...5 reflect the delayed status of DI1...DI6; bit 15
reflects the delayed status of the DIIL input.
Delayed status of digital inputs.
Defines how the true readings of the digital inputs can
be overridden for eg. testing purposes. A bit in
parameter 110.04 DI force data
digital input, and its value is applied whenever the
corresponding bit in this parameter is 1.
Status of digital inputs.
Defines and contains the values of digital inputs that are
used instead of the true readings if selected in
parameter 110.03 DI force
value for DI1.
Forced values of digital inputs.
Defines the activation delay for digital input DI1.
t t
On Off
t
110.05 DI1 ON delay
On
t
110.06 DI1 OFF delay
Off
Activation delay for DI1.
Defines the deactivation delay for digital input DI1. See
parameter 110.05 DI1 ON
Deactivation delay for DI1.
is provided for each
110.04 DI force
110.04 DI force
110.04 DI force
110.04 DI force
110.04 DI force
110.04 DI force
110.04 DI force
selection. Bit 0 is the forced
1
0
1
0
Time
t t
On Off
delay.
Parameters 53
Def/FbEq16
-
1 = 1
-
1 = 1
-
1 = 1
0000h
data.
data.
data.
data.
data.
data.
data.
1 = 1
0000h
1 = 1
0.0 s
10 = 1 s
0.0 s
10 = 1 s