ABB ACS880 Firmware Manual page 58

58 Parameters
No. Name/Value
0000h...FFFFh
111.02 DIO delayed status
0000h...FFFFh
111.05 DIO1 function
Output
Input
Freq
111.06 DIO1 output
source
Not energized
Energized
Ready
Started
Running
Warning
Fault
MCB
Charging
Fault (-1)
Other [bit]
111.07 DIO1 ON delay
Status of
selected
signal
DIO status
0.0 ... 3000.0 s
Description
Status of digital input/outputs.
Status of digital input/outputs DIO8...DIO1 after
activation/deactivation delays.
Bit 0 reflects the delayed status of DIO1.
Delayed status of digital input/outputs.
Selects whether DIO1 is used as a digital output or input.
DIO1 is used as a digital output.
DIO1 is used as a digital input.
DIO1 is used as a frequency input.
Selects a signal to be connected to digital input/output
DIO1 when parameter
Output.
Output is not energized.
Output is energized.
Bit 0 of 106.11 Main status word
energized when the supply unit is ready.
Bit 4 of 106.16 Drive status word 1
is energized when the supply unit is started.
Bit 1 of 106.11 Main status word
energized when the supply unit is running.
Bit 7 of 106.11 Main status word
energized when a warning is active.
Bit 3 of 106.11 Main status word
energized when a fault is active.
Bit 13 of 106.16 Drive status word 1
Output is energized when MCB closing command is
given.
Bit 12 of 106.16 Drive status word 1
Output is energized when external charging is charging
the DC link.
Inverted bit 3 of 106.11 Main status word
Relay is de-energized when a fault is active.
Source selection (see
39).
Defines the activation delay for digital input/output
DIO1 when parameter
Output.
t t
On Off
t
111.07 DIO1 ON delay
On
t
111.08 DIO1 OFF delay
Off
Activation delay for DIO1 when set as an output.
111.05 DIO1 function is set to
(see page 47). Output is
(see page 47). Output
(see page 47). Output is
(see page 47). Output is
(see page 47). Output is
(see page 47).
(see page 47).
(see page 47).
Terms and abbreviations
111.05 DIO1 function is set to
t t
On Off
Def/FbEq16
1 = 1
-
1 = 1
Output
0
1
2
Not
energized
0
1
2
3
4
5
6
7
8
9
on page -
0.0 s
1
0
1
0
Time
10 = 1 s