Standard Di, Ro - ABB ACS880 N5700 Series Firmware Manual

No. Name / Range /
Selection
10

Standard DI, RO

10.1 DI status
10.2 DI delayed status
10.3 DI force selection
b0 DI1
b1 DI2
b2 DI3
b3 DI4
b4 DI5
b5 DI6
b6...14 Reserved
b15 DIIL
0000h...FFFFh
10.4 DI force data
Description
Configuration of digital inputs and relay outputs.
Displays the electrical status of digital inputs DIIL and
DI6...DI1. The activation/deactivation delays of the
inputs (if any are specified) are ignored. A filtering time
can be defined by parameter
Bits 0...5 reflect the status of DI1...DI6; bit 15 reflects
the status of the DIIL input. Example:
1000000000010011b = DIIL, DI5, DI2 and DI1 are on,
DI3, DI4 and DI6 are off.
This parameter is read-only.
Displays the status of digital inputs DIIL and DI6...DI1.
This word is updated only after activation/deactivation
delays (if any are specified). A filtering time can be
defined by parameter
Bits 0...5 reflect the delayed status of DI1...DI6; bit 15
reflects the delayed status of the DIIL input.
This parameter is read-only.
The electrical statuses of the digital inputs can be
overridden for eg. testing purposes. A bit in parameter
10.4 DI force data is provided for each digital input,
and its value is applied whenever the corresponding
bit in this parameter is 1.
1 = Force DI1 to value of bit 0 of parameter
data.
1 = Force DI2 to value of bit 1 of parameter
data.
1 = Force DI3 to value of bit 2 of parameter
data.
1 = Force DI4 to value of bit 3 of parameter
data.
1 = Force DI5 to value of bit 4 of parameter
data.
1 = Force DI6 to value of bit 5 of parameter
data.
1 = Force DIIL to value of bit 15 of parameter
force data.
Contains the values that the digital inputs are forced
to when selected by 10.3 DI force
Bit 0 is the forced value for DI1; bit 15 is the forced value
for the DIIL input.
10.51 DI filter time.
10.51 DI filter time.
10.4 DI force
10.4 DI force
10.4 DI force
10.4 DI force
10.4 DI force
10.4 DI force
selection.
Parameters 173
Def / Type
FbEq 16b / 32b
- / uint16
- / uint16
- / uint16
10.4 DI
1 = 1
- / uint16