ABB ACS880 Firmware Manual page 70

70 Parameters
No. Name/Value
114.20 AI supervision
selection
Bit Name
0 AI1 < MIN
1 AI1 > MAX
2 AI2 < MIN
3 AI2 > MAX
4 AI3 < MIN
5 AI3 > MAX
6...15 Reserved
0000h...FFFFh
114.21 DIO3 output
source
114.22 DI3 ON delay
0.00 ... 3000.00 s
114.22 DIO3 ON delay
*DIO status
**Delayed DIO
status
t
= 114.22 DIO3 ON delay
On
t
= 114.23 DIO3 OFF delay
Off
*Electrical status of DIO (in input mode) or status of selected source (in output mode).
Indicated by
**Indicated by
0.0 ... 3000.0 s
114.22 AI force sel
Bit Value
0 1 = Force AI1 to value of parameter
1 1 = Force AI2 to value of parameter
2 1 = Force AI3 to value of parameter
3...31 Reserved.
Description
(Visible when 114.01 Module 1 type
Specifies the analog input limits to be supervised. See
parameter 114.19 AI supervision
Description
1 = Minimum limit supervision of AI1 active.
1 = Maximum limit supervision of AI1 active.
1 = Minimum limit supervision of AI2 active.
1 = Maximum limit supervision of AI2 active.
1 = Minimum limit supervision of AI3 active.
1 = Maximum limit supervision of AI3 active.
Activation of analog input supervision.
(Visible when 114.01 Module 1 type
Selects a signal to be connected to digital input/output
DIO3 when parameter
Output.
For the available selections, see parameter
output source.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input DI3. See
parameter 114.12 DI1 ON
Activation delay for DI3.
(Visible when 114.01 Module 1 type
Defines the activation delay for digital input/output
DIO3.
t t
On Off
114.05 DIO status.
114.06 DIO delayed status.
Activation delay for DIO3.
(Visible when 114.01 Module 1 type
The true readings of the analog inputs can be
overridden for eg. testing purposes. A forced value
parameter is provided for each analog input, and its
value is applied whenever the corresponding bit in this
parameter is 1.
= FIO-11 or FAIO-01)
function.
= FIO-01)
114.19 DIO3 configuration
114.11 DIO1
= FDIO-01)
delay.
= FIO-01)
Time
t t
On Off
= FIO-11 or FAIO-01)
114.28 AI1 force data.
114.43 AI2 force data.
114.58 AI3 force data.
Def/FbEq16
0000h
1 = 1
Not
energized
is set to
0.00 s
10 = 1 s
0.0 s
1
0
1
0
10 = 1 s
00000000h