ABB ACS880 Firmware Manual page 109

No. Name/Value
Power %
Converter
temperature %
Ambient
temperature
Other [bit]
136.02 PVL filter time
0.00 ... 120.00 s
136.06 AL2 signal source
136.07 AL2 signal scaling
0.00 ... 32767.00
136.09 Reset loggers
Done
All
PVL
AL2
136.10 PVL peak value
-32768.00 ...
32767.00
136.11 PVL peak date
-
136.12 PVL peak time
-
136.13 PVL current at
peak
-32768.00 ...
32767.00 A
136.14 PVL DC voltage at
peak
0.00 ... 2000.00 V
136.15 PVL power at peak
-32768.0...
32767.0 kW
136.16 PVL reset date
-
Description
DxT modules only: Power %,
DxT modules only: Converter temperature %,
Converter temperature %
DxT modules only: 101.70 Ambient temperature percent
(page 44).
Source selection (see Terms and abbreviations
39).
Peak value logger filtering time. See parameter
PVL signal source.
Peak value logger filtering time.
Selects the signal to be monitored by amplitude logger
2. The signal is sampled at 200 ms intervals.
The results are displayed by parameters 136.40...136.49.
Each parameter represents an amplitude range, and
shows what portion of the samples fall within that
range.
The signal value corresponding to 100% is defined by
parameter 136.07 AL2 signal
Amplitude logger 2 can be reset using parameter
Reset loggers. The date and time of the last reset are
stored into parameters
For the selections, see parameter
source.
Defines the signal value that corresponds to 100%
amplitude.
Signal value corresponding to 100%.
Resets the peak value logger and/or amplitude logger 2.
(Amplitude logger 1 cannot be reset.)
Reset completed or not requested (normal operation).
Reset both the peak value logger and amplitude logger
2.
Reset the peak value logger.
Reset amplitude logger 2.
Peak value recorded by the peak value logger.
Peak value.
The date on which the peak value was recorded.
Peak occurrence date.
The time at which the peak value was recorded.
Peak occurrence time.
Line current at the moment the peak value was
recorded.
Line current at peak.
Voltage in the intermediate DC circuit at the moment
the peak value was recorded.
DC voltage at peak.
Power at the moment the peak value was recorded. See
parameter 101.12 Power.
Power at peak.
The date on which the peak value logger was last reset.
Last reset date of the peak value logger.
101.13 Power %
105.11
scaling.
136.50 and 136.51 respectively.
136.01 PVL signal
Parameters 109
Def/FbEq16
6
7
14
on page -
136.01 2.00 s
100 = 1 s
DxT
modules:
Ambient
temperature
136.09
100.00
1 = 1
Done
0
1
2
3
0.00
1 = 1
-
-
-
-
0.00 A
1 = 1 A
0.00 V
10 = 1 V
0.0 kW
-
-