Advertisement
To review or update the power redundancy setting in UEFI System Utilities, see Adjusting the server power supply redundancy setting .
Installing an AC power supply
Installing an AC power supply
Prerequisites
Prerequisites
Before installing a power supply option, review the following:
Power supply warnings and cautions
Power supply redundancy
About this task
About this task
WARNING: To reduce the risk of personal injury from hot surfaces, allow the power supply, power supply blank, or dual slot
WARNING:
power supply adapter to cool before touching it.
CAUTION:
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
either a component or a blank.
Procedure
Procedure
1. If installed, open the cable management arm .
2. If you are installing a power supply in the power supply bay 2, remove the power supply blank.
Retain the blank for future use.
3. Immediately slide the power supply into the bay until it clicks into place.
HPE ProLiant DL560 Gen11 Server User Guide
93
Advertisement
