Advertisement
18. Install the boot device on the secondary riser cage:
a. Install the boot device on the first slot (callout 1).
b. Install the screw on the top of the secondary riser cage (callout 2).
c. Install the boot device bracket screw (callout 3), and then close the riser cage latch (callout 4).
19. Install the secondary riser cage.
20. Connect the boot device signal and power cables to the system board .
21. Install the access panel .
22. Installing the server into the rack .
23. Connect all peripheral cables to the server.
HPE ProLiant DL560 Gen11 Server User Guide
169
Advertisement
