b. Disconnect each power cord from the server.
6. Disconnect all peripheral cables from the server.
7. Remove the server from the rack .
8. Place the server on a flat, level work surface.
9. Remove the access panel .
10. Do one of the following:
Remove the air baffle .
Remove the processor mezzanine tray .
11. Remove the fan cage.
12. Remove the drive box blank:
a. Remove the drive box blank screws (callout 1).
b. Remove the drive box blank (callout 2).
13. (Optional) Install the 2 SFF stacked drive cage in the universal media bay .
14. Install the universal media bay:
a. Install the universal media bay in the server (callout 1).
b. Install the universal media bay screws (callout 2).
HPE ProLiant DL560 Gen11 Server User Guide
107