Advertisement
The installation is complete.
Cabling
Cabling
This chapter includes cabling guidelines and diagrams for internal component cabling.
Subtopics
Subtopics
Cabling guidelines
Cabling guidelines
Cabling diagrams
Cabling diagrams
Internal cabling management
Internal cabling management
Storage cabling
Storage cabling
Optical drive cabling
Optical drive cabling
Universal media bay cabling
Universal media bay cabling
HPE NS204i Boot Device cabling
HPE NS204i Boot Device cabling
OCP bandwidth upgrade cabling
OCP bandwidth upgrade cabling
Riser enablement cabling
Riser enablement cabling
Serial port cabling
Serial port cabling
Chassis intrusion detection switch cabling
Chassis intrusion detection switch cabling
Power switch module / SID module cabling
Power switch module / SID module cabling
Front I/O cabling
Front I/O cabling
Cabling guidelines
Cabling guidelines
Observe the following:
Some diagrams show alphabetical callouts A, B, C, etc. These callouts correspond to labels near the connectors on the cable.
The cable colors in the cabling diagrams used in this chapter are for illustration purposes only.
Observe all guidelines when working with server cables.
Before connecting cables
Before connecting cables
Note the port labels on the PCA components. Not all these components are used by all servers:
System board ports
Drive and power supply backplane ports
Expansion board ports (controllers, adapters, expanders, risers, and similar boards)
Note the label near each cable connector. This label indicates the destination port for the cable connector.
Some data cables are prebent. Do not unbend or manipulate the cables.
To prevent mechanical damage or depositing oil that is present on your hands, and other contamination, do not touch the ends of the
connectors.
HPE ProLiant DL560 Gen11 Server User Guide
179
Advertisement
