Advertisement
7. Place the server on a flat, level work surface.
Remove the access panel
Remove the access panel
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-15 Torx screwdriver available.
About this task
About this task
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to
WARNING:
cool before touching them.
CAUTION:
CAUTION:
To prevent damage to electrical components, properly ground the server before beginning any installation, removal, or
replacement procedure. Improper grounding can cause electrostatic discharge.
CAUTION: To maintain proper system cooling, do not operate the server for long period with the access panel open or
CAUTION:
removed. Operating the server in this manner results in an improper system airflow. For internal hot-plug component
procedures, complete the procedure within 60 seconds. Failure to do so can cause the system temperature to increase and
trip the safety threshold. When this happens:
The health LED flashes amber.
The operating system gracefully shuts down.
Procedure
Procedure
1. Power down the server.
2. If installed, open the cable management arm.
HPE ProLiant DL560 Gen11 Server User Guide
49
Advertisement
