Advertisement
Results
Results
The installation is complete.
Universal media bay option
Universal media bay option
The universal media bay is populated in Box 1.
Subtopics
Subtopics
Installing the universal media bay
Installing the universal media bay
Installing the universal media bay
Installing the universal media bay
Prerequisites
Prerequisites
Before you perform this procedure, make sure that you have a T-10 Torx screwdriver available.
About this task
About this task
This server supports the universal media bay with an optical drive bay, two USB 2.0 ports, DisplayPort 1.1a, and 2 SFF stacked drive cage.
Procedure
Procedure
1. Back up all server data on the drive.
2. If installed, remove the front bezel .
3. Power down the server.
4. If installed, open the cable management arm .
5. Remove all power:
a. Disconnect each power cord from the power source.
HPE ProLiant DL560 Gen11 Server User Guide
106
Advertisement
