Advertisement
Setting up the server
Adjusting the server power supply redundancy setting
Operational requirements
Space and airflow requirements
Temperature requirements
Power requirements
Electrical grounding requirements
Rack warnings and cautions
Server warnings and cautions
Electrostatic discharge
Operations
Remove the front bezel
Power down the server
Open the cable management arm
Extend the server out of the rack
Remove the server from the rack
Remove the access panel
Remove the air baffle
Remove the processor mezzanine tray
Remove the fan cage
Remove the riser cage
Installing the riser cage
Install the fan cage
Install the processor mezzanine tray
Install the air baffle
Install the access panel
Install the server into the rack
Power up the server
Hardware options installation
Server data backup
Hardware option installation guidelines
Installing the front bezel option
Drive options
Drive installation guidelines
Installing a SAS, SATA or NVMe drive
Installing an E3.S drive
Rack mounting options
Rail identification markers
Rack mounting interfaces
Rack rail option
Installing the ball-bearing rack rail
Advertisement
