HP ProLiant DL560 Gen11 User Manual page 76

7. Determine the status of the drive from the drive LED definitions .
8. If removed, install the front bezel .
9. To configure drive arrays, see the relevant storage controller guide .
Results Results
The installation is complete.
Rack mounting options Rack mounting options
Use the quick-deploy, toolless HPE rack rail option to install the server in a standard four-post rack. The rail design supports installation on
rack of different mounting interfaces.
For cable management, the rack rail kit might include one or both of the following options:
Rack rail hoop-and-loop strap
Cable management arm
Subtopics Subtopics
Rail identification markers Rail identification markers
Rack mounting interfaces Rack mounting interfaces
Rack rail option Rack rail option
Installing the server into the rack Installing the server into the rack
Installing the rack rail hook-and-loop strap Installing the rack rail hook-and-loop strap
Installing the cable management arm Installing the cable management arm
Rail identification markers Rail identification markers
The rack rail option support is dependent on these two factors:
HPE ProLiant DL560 Gen11 Server User Guide 76