Advertisement
13. Do one of the following:
Install the air baffle .
Install the processor mezzanine tray .
14. Install the access panel .
15. Installing the server into the rack .
16. Connect all peripheral cables to the server.
17. Connect each power cord to the power source.
18. Connect each power cord to the server.
19. Power up the server .
Results
Results
The installation is complete.
Expansion card options
Expansion card options
The server supports the installation of full-height, full-length, and full-height, half-length PCIe expansion / add-in (AIC) cards such as:
HPE type-p storage controller
Ethernet adapter
HDR InfiniBand adapter
Fibre channel host bus adapter (FC HBA)
For more information on the expansion options validated for this server, see the server QuickSpecs on the Hewlett Packard Enterprise
website:
https://buy.hpe.com/us/en/p/1014705735
https://buy.hpe.com/us/en/p/1014705735
Subtopics
Subtopics
Installing an expansion card
Installing an expansion card
Installing an expansion card
Installing an expansion card
Prerequisites
Prerequisites
Depending on the drive configurations in the different cooling configurations, some Ethernet adapters and InfiniBand cards require
specific system ambient temperature. Review the product QuickSpecs for these requirements on the HPE ProLiant DL560 Gen11 Server
website:
https://buy.hpe.com/us/en/p/1014705735
https://buy.hpe.com/us/en/p/1014705735
Before you perform this procedure, make sure that you have the following items available:
T-10 Torx screwdriver
Phillips No. 1 screwdriver
About this task
About this task
HPE ProLiant DL560 Gen11 Server User Guide
133
Advertisement
