Advertisement
4. Install the drive.
5. Determine the status of the drive from the drive LED definitions .
6. If removed, install the front bezel
7. To configure drive arrays, see the relevant storage controller guide .
Results
Results
The installation is complete.
Installing an E3.S
Installing an
E3.S drive
drive
About this task
About this task
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all bays are populated with
CAUTION:
either a component or a blank.
Procedure
Procedure
HPE ProLiant DL560 Gen11 Server User Guide
74
Advertisement
