Advertisement
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. If the server is in a dual-processor configuration, remove the air baffle .
9. If the server is in a quad-processor configuration:
a. Press the buttons to rotate the processor mezzanine tray handle to the fully open position.
b. Disconnect all cables from the processor mezzanine board.
c. Remove the processor mezzanine tray.
10. Remove the protective film from the thermal interface material.
HPE ProLiant DL560 Gen11 Server User Guide
149
Advertisement
