Advertisement
15. Connect the boot device signal and power cables to the system board .
16. Install the fan cage.
17. Do one of the following:
Install the air baffle .
Install the processor mezzanine tray .
18. Install the access panel .
19. Installing the server into the rack .
20. Connect all peripheral cables to the server.
21. Connect each power cord to the power source.
22. Connect each power cord to the server.
23. Power up the server .
Results
Results
The installation is complete.
Installing the rear HPE
Installing the rear
HPE NS204i Boot Device
Prerequisites
Prerequisites
If the server is in the quad-processor configuration, review the product QuickSpecs for special specific system operating temperature
requirements on the HPE ProLiant DL560 Gen11 Server website:
https://buy.hpe.com/us/en/p/1014705735
https://buy.hpe.com/us/en/p/1014705735
Make sure that the server is updated with the latest operating system firmware and drivers.
Identify the HPE NS204i Boot Device components.
Before you perform this procedure, make sure that you have the following items available:
NS204i Boot Device
HPE ProLiant DL560 Gen11 Server User Guide
164
Advertisement
