HP ProLiant DL560 Gen11 User Manual page 43

Subtopics Subtopics
Remove the front bezel Remove the front bezel
Power down the server Power down the server
Open the cable management arm Open the cable management arm
Extend the server out of the rack Extend the server out of the rack
Remove the server from the rack Remove the server from the rack
Remove the access panel Remove the access panel
Remove the air baffle Remove the air baffle
Remove the processor mezzanine tray Remove the processor mezzanine tray
Remove the fan cage Remove the fan cage
Remove the riser cage Remove the riser cage
Installing the riser cage Installing the riser cage
Install the fan cage Install the fan cage
Install the processor mezzanine tray Install the processor mezzanine tray
Install the air baffle Install the air baffle
Install the access panel Install the access panel
Install the server into the rack Install the server into the rack
Power up the server Power up the server
Remove the front bezel Remove the front bezel
About this task About this task
If you are using the iLO virtual power button to power the server on/off, you do not need to remove the front bezel. Remove the front bezel
only if you need to access the front panel components.
Procedure Procedure
1. If installed, remove the Kensington security lock.
For more information, see the lock documentation.
HPE ProLiant DL560 Gen11 Server User Guide 43