Advertisement
Install the processor mezzanine tray .
21. Install the access panel .
22. Installing the server into the rack .
23. Connect all peripheral cables to the server.
24. Connect each power cord to the power source.
25. Connect each power cord to the server.
26. Power up the server .
27. If removed, install the front bezel .
Results
Results
The installation is complete.
Memory option
Memory option
The server has either 32 DIMM slots in the dual-processor configuration, or 64 DIMM slots in the quad-processor configuration with the
processor mezzanine board installed. All DIMM slots support HPE DDR5 SmartMemory (RDIMM with ECC, LRDIMM) .
DIMM slots on the system board
DIMM slots on the system board
DIMM slots on the processor mezzanine board
DIMM slots on the processor mezzanine board
HPE ProLiant DL560 Gen11 Server User Guide
120
Advertisement
