HP ProLiant DL560 Gen11 User Manual page 37

Intel VROC provides RAID support for direct attached SATA and NVMe SSDs.

The VROC RAID volume must use drives of the same form factor.

Intel VROC requires the server boot mode to be set to UEFI Mode.

In the pre-OS environment, use UEFI System Utilities to enable Intel VROC and create a VROC RAID volume. This task is not

supported in Intelligent Provisioning.

Intel VROC supports RAID management though the following tools:

Non-OS specific: UEFI System Utilities

Windows: Intel VROC GUI, Intel VROC CLI

Linux: mdadm CLI

For more information on Intel VROC features and configuration, see the Intel VROC for HPE Gen11 User Guide:

https://hpe.com/support/VROC-Gen11-UG

Read the Operational requirements for the server.

Read the safety and compliance information:

https://www.hpe.com/support/safety-compliance-enterpriseproducts

Take note of the iLO hostname and default login credentials on the serial number/ iLO information pull tab .

Procedure

1. Unbox the server and verify the contents:

Server

Power cord

Rack-mounting hardware (optional)

Printed setup documentation

The server does not ship with OS media. All system software and firmware is preloaded on the server.

2. (Optional) Install the hardware options.

3. Installing the server into the rack .

4. Decide how to manage the server:

Locally: Use a KVM switch or a connect a keyboard, monitor, and mouse.

Remotely: Connect to the iLO web interface and run a remote console:

a. Verify the following:

iLO is licensed to use the remote console feature.

If iLO is not licensed, visit the HPE website:

https://www.hpe.com/info/ilo

The iLO management port is connected to a secure network.

b. Using a browser, navigate to the iLO web interface, and then log in.

https://<iLO hostname or IP address>

Note the following:

If a DHCP server assigns the IP address, the IP address appears on the boot screen.

If a static IP address is assigned, use that IP address.

c. Enter the iLO login name and password, and then click Log In.

HPE ProLiant DL560 Gen11 Server User Guide