Advertisement
CAUTION:
CAUTION:
A discharge of static electricity from a finger or other conductor might damage system boards or other static-sensitive
devices. To prevent damage, observe antistatic precautions.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless all PCI slots have either a
CAUTION:
riser slot blank or an expansion card installed.
Procedure
Procedure
1. Power down the server.
2. If installed, open the cable management arm .
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Disconnect all peripheral cables from the server.
5. Remove the server from the rack .
6. Place the server on a flat, level work surface.
7. Remove the access panel .
8. Remove the riser cage.
9. (Optional) Install the riser board .
10. If you are installing a low-profile expansion card:
a. Remove the half-height bracket from the expansion card.
b. Install the full-height bracket on the expansion card.
HPE ProLiant DL560 Gen11 Server User Guide
134
Advertisement
