Advertisement
11. Connect the serial port cable to the system board .
12. Install the secondary riser cage.
13. Install the access panel .
14. Installing the server into the rack .
15. Connect all peripheral cables to the server.
16. Connect each power cord to the power source.
17. Connect each power cord to the server.
18. Power up the server .
Configuring the serial port
Configuring the serial port
19. To configure the serial port setting:
a. From the boot screen, press F9 F9 to access the UEFI System Utilities.
b. From the System Utilities screen, select System Configuration > BIOS/Platform Configuration (RBSU) > System Options > Serial Port
Options > Embedded Serial Port.
c. Select a setting.
d. Press F12
F12 key to save your selection.
e. Click Yes-Save Changes.
f. Click Reboot.
Results
Results
The installation is complete.
Internal USB device options
Internal USB device options
The server has one internal USB 2.0 port and one USB 3.2 Gen 1 port that you can use to install an internal USB flash media device for:
HPE ProLiant DL560 Gen11 Server User Guide
177
Advertisement
