Advertisement
Rack mounting interfaces
Rack mounting interfaces
The rack rails can be installed in a rack that has the following mounting interfaces:
Round-hole
Square-hole
The illustrations used in this procedure show an icon on the upper right corner of the image. This icon indicates the type of mounting
interface for which the action illustrated in the image is valid.
Rack rail option
Rack rail option
This server supports the rack rail option #8.
For more information, see installing the ball-bearing rack rail .
Subtopics
Subtopics
Installing the ball-bearing rack rail
Installing the ball-bearing rack rail
Installing the ball-bearing rack rail
Installing the ball-bearing rack rail
Prerequisites
Prerequisites
Make sure that the rail option is compatible with the server configuration .
Small slotted screwdriver—This tool is required if you intend to install the server in a threaded round-hole rack.
About this task
About this task
Threaded round-hole
HPE ProLiant DL560 Gen11 Server User Guide
78
Advertisement
