Safety Information - KYOWA WP-120A Instructions For Use Manual

Safety information

This document describes the safety instructions for the operation of the indicator. Before operating the product, read this document
carefully to familiarize yourself with the unit.
WARNING
Never use beyond the rated specifications as there is the danger of property damage, injury, fire or electrical shock.
Never use in flammable gaseous environments including the following locations as there is the danger of explosion.
o Locations containing corrosive or flammable gases
o Locations near water, oil or subject to chemical splash
If the product malfunctions (smells strange or becomes hot), stop using it immediately and unplug the power cord as there is
danger of fire or electrical shock.
Never attempt to disassemble the product.
Carefully check connections and wiring before applying power.
Be sure to ground the product (with ground resistance of 100 Ω or less).
To allow the operator to immediately shut off the power to the product, install a switch or circuit breaker that complies with
both IEC60947-1 and IEC60947-3 requirements near the product. The switch or breaker installed must also indicate that it
functions to shut off the power to the unit.
Do not allow foreign objects such as metal fragments that result from cutting panels, wires or other materials to enter this
unit.
If the unit is dropped or subject to strong impacts, it could break. If this occurs, stop using it and contact the seller from which
you purchased it.
Overvoltage category: I
Pollution degree: 2
If the unit is used in a manner not specified by the manufacturer, the protection provided by the unit may be impaired.
4
Follow the instructions below to avoid risk of
serious personal injury and death.