KYOWA WP-120A Instructions For Use Manual page 62

4. Settings
4-6-4-2-7-1. Setting items
MAX, MIN
Select whether to hold at the maximum or the minimum
value.
LOAD DIF.
Set the load value of the difference between the maxi-
mum and minimum.
SCALING FACTOR
Input the condition for detecting maximum/minimum
values as a scaling factor.
COUNT
Hold after the set number of times that the condition for
detecting maximum/minimum values is fulfilled.
62
Detecting the maximum/minimum
After the maximum or minimum value is detected, at the time
when the load value exceeds the load difference × the scaling
factor, the A point is held if it is a maximum value hold or the B
point is held if it is a minimum value hold.
A
B
Load difference ×
scaling factor
Load
difference