Introduction; Features; Included Accessories - KYOWA WP-120A Instructions For Use Manual

Introduction

Thank you for purchasing the WP-120A Instrumentation
Amplifier (hereinafter called "indicator").
Please read this document in its entirety before using the
product to get the best performance and ensure safe and
proper operation.

Features

o Five-digit digital display enables direct reading of physical
quantities.
o Waveforms can be checked in real time even when they are
being measured.
o Support for TEDS sensors makes calibration easy.
Automatic calibration is also possible when a TEDS sensor
is connected.
o An equivalent input function is included, making sensitivity
adjustment without actual loads easy.
o Supports remote sense functions. Even using long cables
measurement is possible without losing precision.
o Static strain measurement is possible. Identifying load cell
defects and other problems through plastic deformity is easy.
o In addition to high and low limit comparison, this indicator
also supports high high limit and low low limit comparison
functions.
o Measurement is possible using combinations of band and
five zone judgments as desired.
Each zone supports a variety of judgments, including con-
stant comparison, sampling, peak, bottom, peak to peak,
average value, maximum/minimum and inflection point.
o DIN size supports incorporation with testing devices and
manufacturing equipment, for example.
o D/A output according to designated values is a standard
feature.
o Product complies with RoHS.
o Waveform display function allows input signals to be
checked as waveforms.
o Measurement data can be saved on SD cards and in the
built-in memory of the unit.
o Linearization function improves linearity of load measurements.
SDHC Logo is a trademark of SD-3C, LLC.
Other company names, product names and logos in this
document are the trademarks or registered trademarks of their
respective owners.
2

Included accessories

If anything is missing or damaged, contact us. (For contact
information, see the last page.)
SENSOR connector plug
B2CF 3.50/18/180LR SN OR BX or equivalent part
CONTROL connector plug
HDCB-37P (05) connector or equivalent part
HDC-CTH (4-40) (10) case or equivalent part
Power input terminal bank cover
(pre-installed on unit)
Disclaimers
Information is given about products in this manual only
for the purpose of example and does not indicate any
guarantees against infringements of third-party intellectual
property rights and other rights related to them. We will
bear no responsibility for infringements on third-party intel-
lectual property rights or their occurrence because of the
use of these products.
1
1
1
1