STANDARD ACCESSORIES
The DPM-900/950 series Dynamic Strain Amplifier (hereinafter referred to as the DPM-900/950 series)
comes with the following accessories. After unpacking, check to be sure that they are included.
SAFETY PRECAUTIONS
The DPM-900/950 series is designed in accordance with "8. SPECIFICATIONS." Do not use the
DPM-900/950 series in an environment exceeding the specifications. Or, failure of the DPM-900/950
series may result.
PRIOR TO USE
For safe use of the DPM-900/950 series, do not forget to read the "Safety Precautions" prior to use.
Kyowa Electronic Instruments Co., Ltd. assumes no liability for any damages resulting from user's failure
to comply with the safety precautions.
For safety operation of the DPM-900/950 series, the following symbol mark is used.
SAFETY SYMBOLS
For safety operation of the DPM-900/950 series, the following symbol marks are used in the Instruction
Manual.
WARNING
CAUTION
Instruction Manual
Simplified instruction manual seal
AC power cable (P-25)
3p - 2p conversion plug (CM-52)
BNC cable (U-59 and U-08)
Fuses, midget type (1.0 A and 0.5 A)
Product Warranty
Indicates "PROTECTIVE GROUND TERMINAL."
Be sure to connect the GND terminal to the ground.
However, excludes when grounding with a 3-prong AC power cable.
Improper operation of the system may result in death or severe injury of the
operator.
Improper operation of the system may result in injury of the operator and
physical damage of the system.
1
1
1
1
1 each
1 each
1
1